Check-up and Diagnosis

Oil diagnosis and check-up

Thanks to the internal laboratory and the huge database developed along the years, Pakelo offers several consultancy services including: Predictive analysis (GAP Policy) with the aim to prevent breakdowns connected to wear and malfunctioning.

  • Oil diagnosis with a problem-solving approach;
  • Clear and easy-to-read analysis interpretation;
  • Clear and easy-to-read analysis interpretation;

GAP Policy (Preventive Analysis Management)

Preventive analysis allows to:

  • Know the exact state of mechanical parts;
  • Guarantee greater efficiency of mechanical parts.
  • Instruct on preventive maintenance;
  • Increase the life of lubricated parts;
  • Prevent any possible damage and/or excessive wear;
  • Obtain economic saving;
  • Optimize oil drain intervals;
  • Reduce costs due to down-times.
How to make an effective lubricant sample?
  • Step 1
    Please open the red case and take out the aluminium sampling pump.
  • Step 2
    Insert the sampling tube completely into the coupling device.
  • Step 3
    Fix the sampling tube by tightening the coupling device knob.
  • Step 4
    Tighten the small bottle to the plastic yellow thread.
  • Step 5
    Insert the sampling tube into the tank and start pumping by moving the pump handle till the small bottle is full.
  • Step 6
    After sampling, untighten and remove the tube (not to be used for the other samples) and fix carefully the top to the bottle.
  • Step 7
    Fill in carefully the numbered sampling sheet in all its details. Make sure that the sampling number is the same.
  • Step 8
    Introduce the sampling sheet and the bottle into the delivery container.
  • Step 9
    Seal the delivery container by pressing its top on it. The sample is ready to be delivered.

    Log in to your profile

    Log in to your profile to access your reserved area